HOLDX R 2 Pigtails

Your advantages

  • PLe according to EN 13849-1
  • High Coded according to EN 14119
  • From little windows up to big safety doors
  • Shortest commisioning time
  • Pigtail connection reduces cabling effort
  • Less down- and setup time, due to maintenance Monitoring
  • High tolerance for door offsets

Process guard lock slave, individual, reteachable, 2 x pigtail M12 8-pin, 600 N locking force

In its small and compact design, the HOLDX RS enables a locking force of 600 N. In addition to the locking force of the electromagnet, the movably supported anchor plate has a 50 N permanent magnet which prevents a door from instant opening.

Betreff: HOLDX RS2-CC-W Process guard lock slave, individual, reteachable, 2 x pigtail M12 8-pin, 600 N locking force

General data

Item number
Coding levels
Safety relevant data
Performance Level (EN ISO 13849-1: 2015)
Category (EN ISO 13849-1: 2015)
SIL (EN IEC 62061: 2005 + A2: 2015)
SIL (IEC 61508: 2010)
- Hardware fault tolerance
- PFHd
2,24 x 10⁻⁹
Service life (EN IEC 62061)
20 Years
Switching current per safety output max.
100 mA (DC-12/DC-13)

Environmental conditions

Max. storage temperature
-20 °C...+70 °C
Max. operating temperature
-20 °C...+55 °C
Protection class

Electrical data

Supply voltage
24 VDC (+10/-15%)
Power consumption (incl. OSSD outputs
16 W
Rated current (on 24 VDC)
600 mA
No-load current I0
60 mA
Amount safety inputs
1x 2-channels
Current consumption per input max.
2,75 mA
Current consumption input magnet ON
1,2 mA
Voltage drop safety output (Ud)
0,75 V
Amount OSSD safety output
1x 2-channels
Safety output - output type
Transistor (PNP)
Residual current safety output (Ir)
0,5 mA
Load capacitive reactance safety output max.
20 nF
Amount diagnosis output
Diagnosis output- output type
Transistor (PNP)
Connection type
M12 8-pin, Pigtail 200 mm
Series connection for safe In- and Outputs
max. 30 process locks
Protection class power supply
Switching current per diagnosis output max.
100 mA
Design / Connections
2x Pigtail 8-pin
Risk time
75 ms ms

Mechanical data

45 (35) mm
128,6 (without cabel) mm
33,5 mm
375 g
Dimensions of anchor plate
Width of anchor plate
45 (35) mm
Length of anchor plate
108,2 mm
Height of anchor plate
17,5 mm
Locking force electromagnet
600 N
Permanent resting force
50 N
Smart resting force
0/ 30 N/ 50 N
Weight process lock
375 g
Weight anchor plate
125 g
Torque (mounting screw) process lock
6 Nm
Torque (mounting screw) anchor plate
6 Nm
Screwing with raised head screw M6 Torx with pin
Material housing lock
PBT GF30, Aluminium eloxated black, TPE, PC
Shock resistance
30 g / 11 ms
Vibration resistance
1 g, 5-150 Hz
Switching distance according to DIN EN 60947-5-3:2014-12
Assured switching distance ON S(ao)
6 mm
Assured switching distance OFF S(ar)
18 mm
Typical switching distance S(n)
11 mm
Repeat accuracy R switching distance
<0,5 mm
2 mm
Generall periods
Readiness delay t(v)
5000 ms
Start delay acctuator t(on)
75 ms
Safety function times
Switch-off reaction time inputs
max.3 ms
Switch-off reaction time anchor plate - Outputs t(off)
max. 75 ms
Test impulse length OSSD Sicherheitsausgänge
0,3 ms