Your advantages

  • Robust design
  • Fast mounting on aluminum profiles (without the use of mounting plates)
  • User-friendly status display via coloured marking of the emergency stop button
  • Fast commissioning and fast replacement with M12 plug connectors

EDI B7
Emergency stop button in slimline housing (M12-4 pin)

 

The EDI emergency stop buttons have a modular design.

Select the head, contact and if desired the corresponding housing or simply immediately select the EDI slimline variant in a slimline housing. The special feature of the EDI buttons is the optionally available self-monitoring contact.

To help maintain safety, the switching elements in the emergency stop buttons/emergency off buttons are fitted with a safety contact. This constantly monitors the proper connection between the emergency stop button/emergency off button and the contact element. Even redundant, secure emergency off chains are ineffective if the contact is not perfectly connected to the emergency off actuator. If the emergency stop button/emergency off button becomes disconnected from the contact element due to negligent installation or mechanical damage, the safety contact trips immediately and the machine is shut down. The machine can only be placed into operation again when the fault has been rectified.

 


Betreff: EDI B7 Emergency stop button in slimline housing (M12-4 pin)


General data

Functional type
Emergency-stop-button in slimline housing (M12-4 pin)
Item number
SP-G-61-000-02

Safety data

Approvals
TÜV_SÜD, CE

Environmental conditions

Max. storage temperature
-25 ... 70 °C
Max. operating temperature
-25 ... 80 °C

Electrical data

Design / Connections
M12 4-pin (m)
Bounce time
< 10ms
Direct opening contact
according to EN60947-5-1, App. K
Contact material
AgNi
Test voltage
2.0 kV
Rated operating voltage Ue
AC 15: 240 V / 120 V | DC13: 250 V / 125 V / 60 V / 24 V
Switching capacity
1.1Ie
Continuous thermal current
2.5 A
Direct opening
according to EN 60947-5-1, Annex K
Direct opening path
> 3 mm
Sensor type
2 NC contacts (positively opening)
Rated operating current Iₑ
AC 15: 1,5 A / 3 A | DC13: 0,27 A / 0,55 A / 1 A / 2 A
Utilisation category
DC13

Mechanical data

Mounting
Clip at the rear
Mechanical service life
50.000 switching cycles

Equipment