HOLDX RS1-P12-W-B

In its small and compact design, the HOLDX RS enables a locking force of 600 N. In addition to the locking force of the electromagnet, the movably supported anchor plate has a 50 N permanent magnet which prevents a door from instant opening.

General data

Type designation
RS1-P12-W-B
Item number
SP-X-71-001-21
Coding levels
Individually
Safety relevant data
 
Performance Level (EN ISO 13849-1: 2015)
PLe
Category (EN ISO 13849-1: 2015)
Cat.4
SIL (EN IEC 62061: 2005 + A2: 2015)
SIL CL3
SIL (IEC 61508: 2010)
SIL3
- Hardware fault tolerance
HFT1
- PFHd
2,24 x 10⁻⁹
Service life (EN IEC 62061)
20 Years
Switching current per safety output max.
100 mA (DC-12/DC-13)

Environmental conditions

Max. storage temperature
-20 °C...+70 °C
Max. operating temperature
-20 °C...+55 °C
Protection class
IP67

Electrical data

Design / Connections
1x Pigtail 12-pin
Bluetooth
Supply voltage
24 VDC (+10/-15%)
No-load current I0
60 mA
Amount safety inputs
1x 2-channels
Rated current (on 24 VDC)
600 mA
Power consumption (incl. OSSD outputs
16 W
Current consumption per input max.
2,75 mA
Amount OSSD safety output
1x 2-channels
Safety output - output type
Transistor (PNP)
Voltage drop safety output (Ud)
0,75 V
Residual current safety output (Ir)
0,5 mA
Load capacitive reactance safety output max.
20 nF
Amount diagnosis output
1
Diagnosis output- output type
Transistor (PNP)
Switching current per diagnosis output max.
100 mA
Connection type
M12 8-pin, Pigtail 200 mm
Protection class power supply
III
Series connection for safe In- and Outputs
max. 30 process locks

Mechanical data

Dimensions
 
Width
45 (35) mm
Length
128,6 (without cabel) mm
Height
33,5 mm
Weight
375 g
Dimensions of anchor plate
 
Width of anchor plate
45 (35) mm
Length of anchor plate
108,2 mm
Height of anchor plate
17,5 mm
Locking force electromagnet
600 N
Permanent resting force
50 N
Smart resting force
0/ 30 N/ 50 N
Weight process lock
375 g
Weight anchor plate
125 g
Torque (mounting screw) process lock
6 Nm
Torque (mounting screw) anchor plate
6 Nm
Mounting
Screwing with raised head screw M6 Torx with pin
Material housing lock
PBT GF30, Aluminium eloxated black, TPE, PC
Material housing anchor plate
PBT GF30, Aluminium eloxated black, TPE, PC
Shock resistance
30 g / 11 ms
Vibration resistance
1 g, 5-150 Hz
Switching distance according to DIN EN 60947-5-3:2014-12
 
Assured switching distance ON S(ao)
6 mm
Assured switching distance OFF S(ar)
18 mm
Minimum switching distance S0min
0,5 mm
Typical switching distance S(n)
11 mm
Repeat accuracy R switching distance
<0,5 mm
Hysteresis
2 mm
Generall periods
 
Readiness delay t(v)
5000 ms
Start delay acctuator t(on)
75 ms
Safety function times
 
Switch-off reaction time inputs
max.3 ms
Switch-off reaction time anchor plate - Outputs t(off)
max. 75 ms
Test impulse length OSSD Sicherheitsausgänge
0,3 ms

Drawings

Approach
Approach
Dimensions
Dimensions
Switching gap
Switching gap
Approach direction
Approach direction