Ideal for large doors. Thanks to the locking force of 1200 N, the HOLDX RL prevents doors from tearing open. With a slim width of only 35 mm, the guard locking is ideal for space-saving installation on aluminum profi le systems. Like the HOLDX RS, the guard locking has also has a permanent magnet of 50 N, which prevents a door from opening.

Betreff: HOLDX RL2-CC-W

General data

Type designation
Item number
Coding levels
Safety relevant data
Performance Level (EN ISO 13849-1: 2015)
Category (EN ISO 13849-1: 2015)
SIL (EN IEC 62061: 2005 + A2: 2015)
SIL (IEC 61508: 2010)
- Hardware fault tolerance
- PFHd
2,24 x 10⁻⁹
Service life (EN IEC 62061)
20 Years
Switching current per safety output max.
100 mA (DC-12/DC-13)

Environmental conditions

Max. storage temperature
-20 °C...+70 °C
Max. operating temperature
-20 °C...+55 °C
Protection class
∆T max
0,5 °C/ min

Electrical data

Design / Connections
2x Pigtail 8-pin
Supply voltage
24 VDC (+10/-15%)
No-load current I0
60 mA
Amount safety inputs
1x 2-channels
Rated current (on 24 VDC)
645 mA
Power consumption (incl. OSSD outputs
17 W
Current consumption per input max.
2,75 mA
Current consumption input magnet ON
1,2 mA
Amount OSSD safety output
1x 2-channels
Safety output - output type
Transistor (PNP)
Voltage drop safety output (Ud)
0,75 V
Residual current safety output (Ir)
0,5 mA
Load capacitive reactance safety output max.
20 nF
Amount diagnosis output
Diagnosis output- output type
Transistor (PNP)
Switching current per diagnosis output max.
100 mA
Connection type
(Version HOLDX RL1-8P) M12 8-pin, Pigtail 200 mm
Protection class power supply
Series connection for safe In- and Outputs
max. 30 process locks

Mechanical data

34 mm
(without cable) 240 mm
31 mm
Locking force electromagnet
1200 N
Permanent resting force
50 N
Smart resting force
0/ 30 N/ 50 N
Weight process lock
725 g
Weight anchor plate
475 g
Torque (mounting screw) process lock
6 Nm
Torque (mounting screw) anchor plate
6 Nm
Screwing with raised head screw M6 Torx with pin
Material housing lock
PBT GF30, Aluminium eloxated black, AlMgSi, TPE, PC
Material housing anchor plate
PBT GF30, Aluminium eloxated black, AlMgSi, TPE, PC
Shock resistance
30 g / 11 ms
Vibration resistance
1 g, 5-150 Hz
Switching distance according to DIN EN 60947-5-3:2014-12
Assured switching distance ON S(ao)
4 mm
Assured switching distance OFF S(ar)
15 mm
Minimum switching distance S0min
0,5 mm
Typical switching distance S(n)
5 mm
Repeat accuracy R switching distance
<0,5 mm
2 mm
Generall periods
Readiness delay t(v)
3000 ms
Start delay acctuator t(on)
75 ms
Safety function times
Switch-off reaction time inputs
max.3 ms
Switch-off reaction time anchor plate - Outputs t(off)
max. 75 ms
Test impulse length OSSD Sicherheitsausgänge
0,3 ms