HOLDX R 2 Pigtails

Your advantages

  • PLe according to EN 13849-1
  • High Coded according to EN 14119
  • From little windows up to big safety doors
  • Shortest commisioning time
  • Pigtail connection reduces cabling effort
  • Less down- and setup time, due to maintenance Monitoring
  • High tolerance for door offsets

 

HOLDX RS2-CC-S
Magnetic guard lock slave, standard coding, 2 x pigtail M12 8-pin, 600 N locking force

In its small and compact design, the HOLDX RS enables a locking force of 600 N. In addition to the holding force of the electromagnet, the movable anchor plate has a 50 N permanent magnet that prevents a door from springing open immediately. The integrated RFID safety sensor meets the highest performance level PLe according to EN ISO 13849-1:2016. An integrated Bluetooth interface and the extended LED diagnostics enable smart operation as well as fast diagnostics.

 

HOLDX R User Tutorials

Our HOLDX R User Tutorials are now available as a playlist on YouTube! Our product manager Rico Czernig explains topics like the subsequent magnet calibration or diagnostic data. Have a look at the playlist for HOLDX RL and RS, as well as for our HOLDX Manager!

 


Betreff: HOLDX RS2-CC-S Magnetic guard lock slave, standard coding, 2 x pigtail M12 8-pin, 600 N locking force


General data

Type designation
HOLDX RS2-CC-S
Item number
SP-X-71-001-08
Coding levels
Standard
Safety relevant data
Category (EN ISO 13849-1: 2015)
Cat.4
SIL (IEC 61508: 2010)
SIL3
- Hardware fault tolerance
HFT1
- PFHd
2,24 x 10⁻⁹
Service life (EN IEC 62061)
20 Years
Switching current per safety output max.
100 mA (DC-12/DC-13)

Safety data

Performance Level (EN ISO 13849-1: 2015)
PLe
SIL (EN IEC 62061: 2005 + A2: 2015)
SIL CL3

Environmental conditions

Max. storage temperature
-20 °C...+70 °C
Max. operating temperature
-20 °C...+55 °C

Electrical data

Supply voltage
24 VDC (+10/-15%)
Power consumption (incl. OSSD outputs
16 W
Rated current (on 24 VDC)
600 mA
No-load current I0
60 mA
Amount safety inputs
1x 2-channels
Current consumption per input max.
2,75 mA
Current consumption input magnet ON
1,2 mA
Voltage drop safety output (Ud)
0,75 V
Amount OSSD safety output
1x 2-channels
Safety output - output type
Transistor (PNP)
Residual current safety output (Ir)
0,5 mA
Load capacitive reactance safety output max.
20 nF
Amount diagnosis output
1
Diagnosis output- output type
Transistor (PNP)
Connection type
M12 8-pin, Pigtail 200 mm
Series connection for safe In- and Outputs
max. 30 process locks
Protection class power supply
III
Switching current per diagnosis output max.
100 mA
Design / Connections
2x Pigtail 8-pin
Risk time
75 ms ms

Mechanical data

Dimensions
Width
45 (35) mm
Length
128,6 (without cabel) mm
Height
33,5 mm
Dimensions of anchor plate
Width of anchor plate
45 (35) mm
Length of anchor plate
108,2 mm
Height of anchor plate
17,5 mm
Locking force electromagnet
600 N
Permanent magnet
50 N
Smart resting force
0/ 30 N/ 50 N
Weight process lock
375 g
Weight anchor plate
125 g
Torque (mounting screw) process lock
6 Nm
Torque (mounting screw) anchor plate
6 Nm
Mounting
Screwing with raised head screw M6 Torx with pin
Material housing lock
PBT GF30, Aluminium eloxated black, TPE, PC
Shock resistance
30 g / 11 ms
Vibration resistance
1 g, 5-150 Hz
Switching distance according to DIN EN 60947-5-3:2014-12
Assured switching distance ON S(ao)
6 mm
Assured switching distance OFF S(ar)
18 mm
Minimum switching distance S0min
0,5 mm
Typical switching distance S(n)
11 mm
Repeat accuracy R switching distance
<0,5 mm
Hysteresis
2 mm
Generall periods
Readiness delay t(v)
5000 ms
Start delay acctuator t(on)
75 ms
Safety function times
Switch-off reaction time inputs
max.3 ms
Switch-off reaction time anchor plate - Outputs t(off)
max. 75 ms
Test impulse length OSSD Sicherheitsausgänge
0,3 ms

Electrical drawings

Connection drawing
Connection drawing
Connection example 1
Connection example 1

Equipment