HOLDX_S-SAFIX_Set-Default.249

Your advantages

  • Compact process lock
  • 500 N locking force
  • RFID sensor
  • LED diagnosis

HOLDX S1-S3-A-P SET
SET HOLDX S1 process lock with RFID safety sensor

The new SAFIX 3 RFID safety sensor impresses due to its compact design and a hole distance of 22 mm. It can be actuated from the front and both sides and is available in 3 different versions with a choice of low level or high level coding according to EN ISO 14419. The sensor has protection class IP69K, holds an ECOLAB approval and can either be purchased with an M12, 8-pole pigtail cable or a fixed cable length of 5 or 10 metres.

Thanks to its OSSD output signals, the sensor can be connected to all standard control and safety relays. A total of up to 30 sensors can be switched in series. An information signal and a three colour LED display on the sensor are provided for diagnosis purposes.

 

General data

Type designation
HOLDX S1-S3-A-P SET
Item number
SP-X-73-000-51
Functional type
Magnetic process lock with RFID safety sensor
Approvals
TÜV_SÜD, CE
Safety-relevant data SAFIX 3
 
Performance level (EN ISO 13849-1)
PLe
SIL
SIL3, SILCL3
Category (EN ISO 13849)
Kat. 4
Service life TM (EN ISO 13849-1)
20 Years
PFHd (EN ISO 13849)
2,24 x 10⁻⁹
Coding levels
Standard

Environmental conditions

Max. storage temperature
−25 … +70 °C
Max. operating temperature
−20… +50 °C
Protection class
IP67

Electrical data

Electrical Data SAFIX 3
 
Overvoltage category
III
Contamination level
3
Rated impulse withstand voltage Uimp
1000 V kV
Electrical service life (nominal load)
20 Years
Design / Connections
M12 male connector, 8-pin / Safety sensor: M12 female connector, 8-pin
Contact type
OSSD
Rated operating voltage Ue
24 V V
Supply voltage
Ue: 24 VDC − 15%/+ 10% (PELV according to 60204-1) V
Rated insulation voltage Ui
50 V
Power consumption in ambient conditions
6,4 W
No-load current I0
HOLDX: max. 300 mA SAFIX: (not activated) 10 mA / (activated) 30 mA
Max. voltage (VDC)
1 A
Switching frequency
HOLDX: 1 kHz SAFIX: 3
- Solenoid control
IN, Pin 8
LED lighting
3 colors
Connection type
Cable
Risk time (safe switch-off time) (also with series connection)
DC-13 ms
Series connection
30
Rated operating current Iₑ
0,6 A
Utilisation category
DC-13
Rated operating voltage Ue
24 V
Electrical data HOLDX S1
 
Power consumption in ambient conditions
6,4 W
Switching frequency
1000 Hz
No-load current I0
max. 300 mA

Mechanical data

Width
40 mm
Length
85 mm
Height
49 mm
Locking force Fmax
 
- typical
500 N
- guaranteed
30 N
Height offset
± 2,5 mm
Lateral offset
± 2,5 mm
Housing material
HOLDX: Aluminium, hard anodised SAFIX: PBT
Electric magnet material
Aluminium, hard anodised
Anchor plate material
Steel, nickel-plated
Shock resistance
30 g/11 ms
Vibration resistance
10-55 MHz Hz
Switching distance Sn
12 mm
Assured switching distance ON S(ao)
8 mm
Assured switching distance OFF S(ar)
18 mm
Hysteresis
2 mm
Repeat accuracy R
< 0,5 mm
Mechanical service life
>10⁷ switching processes switching cycles
Dimensions of anchor plate
 
Width of anchor plate
40 mm
Length of anchor plate
87,5 mm
Height of anchor plate
22 mm

Electrical drawings

Connection example 1
Connection example 1
Connection example 2
Connection example 2

Equipment