Your advantages

  • Robust design
  • Fast mounting on aluminum profiles (without the use of mounting plates)
  • Status display of the emergency stop button
  • Fast commissioning and fast replacement with M12 plug connectors

EDI B7B
Emergency stop button in slimline housing (M12 8-pin)

The EDI emergency stop buttons have a modular design.

Select the head, contact and if desired the corresponding housing or simply immediately select the EDI slimline variant in a slimline housing. The special feature of the EDI buttons is the optionally available self-monitoring contact.

To help maintain safety, the switching elements in the emergency stop buttons/emergency off buttons are fitted with a safety contact. This constantly monitors the proper connection between the emergency stop button/emergency off button and the contact element. Even redundant, secure emergency off chains are ineffective if the contact is not perfectly connected to the emergency off actuator. If the emergency stop button/emergency off button becomes disconnected from the contact element due to negligent installation or mechanical damage, the safety contact trips immediately and the machine is shut down. The machine can only be placed into operation again when the fault has been rectified.

 

General data

Item number
SP-G-61-000-01
Functional type
Emergency stop button in slimline housing (M12-8 pin)

Environmental conditions

Max. storage temperature
-25 ... +85 °C
Max. operating temperature
-25 ... +85 °C
Protection class
IP65

Electrical data

Design / Connections
M12 8-pin
Bounce time
< 10ms
Contact material
AgNi, gilded 5μm
Test voltage
1.5 kV
Rated operating voltage Ue
1V... 36V (UL: 30V DC, 100mA, 250mW max.) V
Direct opening
according to EN60947-5-1, Annex K
Direct opening path
> 3 mm
Sensor type
2 NC contacts (positively opening)
Rated operating current Iₑ
1mA ... 250mA A

Mechanical data

Mounting
Clip at the rear
Mechanical service life
50,000 switching cycles

Equipment